[Blabber] Does Hack Manhattan have any ...

Prescott Ogden ogden at pres.co.tt
Mon Nov 6 03:20:17 UTC 2017


For very thin, uninsulated wire I would cut a section of desoldering braid
and use one of those strands. It helps to handle under a stereo microscope.

On Sun, Nov 5, 2017 at 10:12 PM, Chris Stratton <cs07024 at gmail.com> wrote:

> If you want something even thinner than wire wrap wire, find a very
> flexible AC power cord on a piece of junk, cut and strip it, and pull out a
> single strand.
>
> Of course using un-insulated wire presumes that the geometry will prevent
> shorts; having never studied the PCB near the charging jack in a modern
> iPhone, I decline to offer any opinion on that at all.
>
> Working under HM's stereo zoom microscope would, however, be recommended.
>
> On Sun, Nov 5, 2017 at 8:37 PM, James Carpino via Blabber <
> blabber at list.hackmanhattan.com> wrote:
>
>> I wanna say, wire wrap wire?  check wire boxes for that..
>> but I don't actually know if there is any...
>>
>> for those who don't know, wire wrap wire is very thin wire great for pcb
>> fixes, very thin with thin insulation & takes solder well (probably silver
>> coated).
>>
>> ------------------------------
>> *From:* Vincent <eternalrecycler at gmail.com>
>> *To:* Hack Manhattan! <blabber at list.hackmanhattan.com>
>> *Sent:* Sunday, November 5, 2017 8:31 PM
>> *Subject:* [Blabber] Does Hack Manhattan have any ...
>>
>> ... magnet wire around 0.1-0.2mm?
>>
>> Might get an iPhone 4S with a torn battery connector.   One pad got torn
>> off, but we can solder that magnet wire from the battery terminal to the
>> test point next to the torn pad.   I would need 0.25" but if there isn't
>> any, I'll go get 100m ($3 on eBay).
>>
>> Thanks for reading!
>>
>> Vincent
>>
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>> Unsubscribe: https://list.hackmanhattan.com/options/blabber or send a
>> blank email to blabber-unsubscribe at list.hackmanhattan.com
>>
>>
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>> Unsubscribe: https://list.hackmanhattan.com/options/blabber or send a
>> blank email to blabber-unsubscribe at list.hackmanhattan.com
>>
>
>
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
>
> Unsubscribe: https://list.hackmanhattan.com/options/blabber or send a
> blank email to blabber-unsubscribe at list.hackmanhattan.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20171105/1b669220/attachment.html>


More information about the Blabber mailing list