[Blabber] Laser Cutting

Max Beyer mwbpenguin at gmail.com
Sun Nov 20 16:34:24 UTC 2016


Great thanks! Yes, I found the link and I got the file set up. I'm just
wondering what settings I should use... I see that the settings are in the
layer name... I found a laser settings calculator but it didn't have feed
or ppm just speed and power. I'm using 1/8" plywood.

-Max-
mwbpenguin at gmail.com

On Sun, Nov 20, 2016 at 11:07 AM, citybadger <citybadger at gmail.com> wrote:

> I can be there.
>
> The template is on the HM wiki, a link in near the bottom above the table.
> https://wiki.hackmanhattan.com/Lazer_Operations_Wiki
>
> Read up on the Turnkey laser Inkscape plug-in to learn how to set up the
> file. Link is also on that page. Concentrate on setting your file up, if
> you have trouble installing the plug-in we can always use my computer.
> Setting up Pronterface on your PC is even less necessary.
>
> On Sat, Nov 19, 2016 at 8:07 PM, Max Beyer <mwbpenguin at gmail.com> wrote:
>
>> Hi,
>> I'm thinking about coming to the open house this Tuesday. I'd like to
>> laser cut something (out of wood). I took a look at the wiki and I was
>> wondering if any of the Verified Members would be at the open house on
>> Tuesday. I also saw that you need to use a template to lay out the design.
>> The template doesn't seem to be on the wiki... Is it on the workstation and
>> Hack Manhattan?
>> Thanks!
>>
>> -Max-
>> mwbpenguin at gmail.com
>>
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>
>
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20161120/7ea3f92f/attachment.html>


More information about the Blabber mailing list