[Blabber] Interesting Idea - PCB resist generation
rmd6502 at gmail.com
Thu Apr 14 14:38:42 UTC 2016
I'm not the first to think of this:
On Thu, Apr 14, 2016 at 10:32 AM, Robert Diamond <rmd6502 at gmail.com> wrote:
> I was listening to "Still Untitled - the Adam Savage Project" podcast, and
> he mentioned an interesting technique that he called "boutique laser
> printing". Basically run a laser cutter in raster mode over a piece of
> paper that's covered with toner and fuse the toner in your pattern.
> So imagine doing this on a PCB? Bulk toner is cheap:
> Caveats: since toner is meant to respond to static electricity I don't
> know how much will stay on the board. Since it's a lightweight powder you
> can't use the fan for ventilation, and I have no idea how toxic toner dust
> (particularly burnt toner dust) is. I also don't know how long it would
> take to coat the laser cutter lens (and thus crack it).
> Still - could be fun, especially if the problems above could be worked
> around somehow.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Blabber