[Blabber] Printing and Sawing Question

Matt llipschutz at gmail.com
Fri Nov 6 00:11:24 UTC 2015


Aand rtunning ~30 min late...

On Thu, Nov 5, 2015 at 1:48 PM, Matt <llipschutz at gmail.com> wrote:

> ah don't worry about "late", I'll be around until at least 10, probably
> later.  Take your time.
>
> On Thu, Nov 5, 2015 at 1:44 PM, Han Sheng Chia <chiahansheng at gmail.com>
> wrote:
>
>> That's awesome Matt and Guan! Thanks so much Matt, I look forward to
>> seeing you later (Might be slightly late but I'll try to escape from work
>> and get there on time.)
>>
>> On Thu, Nov 5, 2015 at 11:39 AM, Matt <llipschutz at gmail.com> wrote:
>>
>>> I actually didn't know about that one and bought a SECOND one from HF,
>>> which I promptly cut into pieces for detail work.
>>>
>>> On Thu, Nov 5, 2015 at 11:34 AM, Guan Yang <guan at yang.dk> wrote:
>>>
>>>> Oh, you already said that.
>>>>
>>>> On Nov 5, 2015, at 11:33, Guan Yang <guan at yang.dk> wrote:
>>>>
>>>> If it hasn't been thrown out, we also have a cheapo brake from Harbor
>>>> Freight around somewhere.
>>>>
>>>> On Nov 5, 2015, at 11:25, Matt <llipschutz at gmail.com> wrote:
>>>>
>>>> So, 22 gauge sheet steel can be cut with tin snips...that is the
>>>> easiest way.  It can also be bent by hand, meaning you can clamp it down to
>>>> the bench, grab a pair of pliers and some wood, and just BEND it.
>>>>
>>>> I will be in by 7PM this evening, and can show you how to do all you
>>>> need with sheetmetal.  In fact, we have a brake which is used to bent sheet.
>>>>
>>>> I'll see you this evening.
>>>>
>>>> -Matt
>>>> _______________________________________________
>>>> Blabber mailing list Blabber at list.hackmanhattan.com
>>>> https://list.hackmanhattan.com/listinfo/blabber
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Blabber mailing list Blabber at list.hackmanhattan.com
>>>> https://list.hackmanhattan.com/listinfo/blabber
>>>>
>>>
>>>
>>> _______________________________________________
>>> Blabber mailing list Blabber at list.hackmanhattan.com
>>> https://list.hackmanhattan.com/listinfo/blabber
>>>
>>
>>
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20151105/9fb4ba04/attachment.html>


More information about the Blabber mailing list