[Blabber] Printing and Sawing Question

Han Sheng Chia chiahansheng at gmail.com
Thu Nov 5 18:44:54 UTC 2015


That's awesome Matt and Guan! Thanks so much Matt, I look forward to seeing
you later (Might be slightly late but I'll try to escape from work and get
there on time.)

On Thu, Nov 5, 2015 at 11:39 AM, Matt <llipschutz at gmail.com> wrote:

> I actually didn't know about that one and bought a SECOND one from HF,
> which I promptly cut into pieces for detail work.
>
> On Thu, Nov 5, 2015 at 11:34 AM, Guan Yang <guan at yang.dk> wrote:
>
>> Oh, you already said that.
>>
>> On Nov 5, 2015, at 11:33, Guan Yang <guan at yang.dk> wrote:
>>
>> If it hasn't been thrown out, we also have a cheapo brake from Harbor
>> Freight around somewhere.
>>
>> On Nov 5, 2015, at 11:25, Matt <llipschutz at gmail.com> wrote:
>>
>> So, 22 gauge sheet steel can be cut with tin snips...that is the easiest
>> way.  It can also be bent by hand, meaning you can clamp it down to the
>> bench, grab a pair of pliers and some wood, and just BEND it.
>>
>> I will be in by 7PM this evening, and can show you how to do all you need
>> with sheetmetal.  In fact, we have a brake which is used to bent sheet.
>>
>> I'll see you this evening.
>>
>> -Matt
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>>
>>
>>
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>
>
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20151105/c21a5a39/attachment.html>


More information about the Blabber mailing list