[Blabber] Printing and Sawing Question

Matt llipschutz at gmail.com
Thu Nov 5 16:39:32 UTC 2015


I actually didn't know about that one and bought a SECOND one from HF,
which I promptly cut into pieces for detail work.

On Thu, Nov 5, 2015 at 11:34 AM, Guan Yang <guan at yang.dk> wrote:

> Oh, you already said that.
>
> On Nov 5, 2015, at 11:33, Guan Yang <guan at yang.dk> wrote:
>
> If it hasn't been thrown out, we also have a cheapo brake from Harbor
> Freight around somewhere.
>
> On Nov 5, 2015, at 11:25, Matt <llipschutz at gmail.com> wrote:
>
> So, 22 gauge sheet steel can be cut with tin snips...that is the easiest
> way.  It can also be bent by hand, meaning you can clamp it down to the
> bench, grab a pair of pliers and some wood, and just BEND it.
>
> I will be in by 7PM this evening, and can show you how to do all you need
> with sheetmetal.  In fact, we have a brake which is used to bent sheet.
>
> I'll see you this evening.
>
> -Matt
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
>
>
>
>
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20151105/082fa6a6/attachment.html>


More information about the Blabber mailing list