[Blabber] Printing and Sawing Question

Guan Yang guan at yang.dk
Thu Nov 5 16:34:05 UTC 2015

Oh, you already said that.

> On Nov 5, 2015, at 11:33, Guan Yang <guan at yang.dk> wrote:
> If it hasn't been thrown out, we also have a cheapo brake from Harbor Freight around somewhere.
>> On Nov 5, 2015, at 11:25, Matt <llipschutz at gmail.com <mailto:llipschutz at gmail.com>> wrote:
>> So, 22 gauge sheet steel can be cut with tin snips...that is the easiest way.  It can also be bent by hand, meaning you can clamp it down to the bench, grab a pair of pliers and some wood, and just BEND it. 
>> I will be in by 7PM this evening, and can show you how to do all you need with sheetmetal.  In fact, we have a brake which is used to bent sheet.
>> I'll see you this evening.
>> -Matt
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com <mailto:Blabber at list.hackmanhattan.com>
>> https://list.hackmanhattan.com/listinfo/blabber <https://list.hackmanhattan.com/listinfo/blabber>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20151105/4c0a4021/attachment.html>

More information about the Blabber mailing list