[Blabber] Printing and Sawing Question

Stephen Lynch citybadger at gmail.com
Thu Nov 5 04:55:51 UTC 2015


Even if it's still with us, it's crap. I keep forgetting to buy a new one



> On Nov 4, 2015, at 10:32 PM, Justin Levinson <localtalent at gmail.com> wrote:
> 
> I believe the bench grinder is no longer with us, no?
> 
>> On Wed, Nov 4, 2015 at 10:25 PM, Antonio <diveblends at gmail.com> wrote:
>> With a bit of practice you can do it either on the bench grinder or on the belt sander. mark your part with a thin line and grind away lightly with multiple passes rotating the piece. Assuming you just want to get rid of the sharp corner. For a greater radius the suggestion to use saw and file is good. 
>> 
>>> On Wed, Nov 4, 2015 at 10:09 PM, Han Sheng Chia <chiahansheng at gmail.com> wrote:
>>> Hello! 
>>> 
>>> I'm new to this mailing list and so not quite sure who it goes to...but I came to an open house a couple of weeks back and had some questions about rounding the edges of a small (5x5") 22GA (0.028'') metal plate.I'm not quite sure how to do it, but folks I met mentioned that I should email the listserv and there could be people who would  be familiar with sawing and working with metal. If you are able to help...I would love to chat with you!
>>> 
>>> I'm also interested in coming to the open house tmr to print, but remember that the 3D printer can be a little hard to work. Would someone familiar with it be around who could possibly help with that?
>>> 
>>> Thanks so much, and let me know :-)
>>> 
>>> Hans
>>> 
>>> _______________________________________________
>>> Blabber mailing list Blabber at list.hackmanhattan.com
>>> https://list.hackmanhattan.com/listinfo/blabber
>> 
>> 
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
> 
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20151104/af35c7c8/attachment.html>


More information about the Blabber mailing list