[Blabber] Printing and Sawing Question

Justin Levinson localtalent at gmail.com
Thu Nov 5 04:32:58 UTC 2015


I believe the bench grinder is no longer with us, no?

On Wed, Nov 4, 2015 at 10:25 PM, Antonio <diveblends at gmail.com> wrote:

> With a bit of practice you can do it either on the bench grinder or on the
> belt sander. mark your part with a thin line and grind away lightly with
> multiple passes rotating the piece. Assuming you just want to get rid of
> the sharp corner. For a greater radius the suggestion to use saw and file
> is good.
>
> On Wed, Nov 4, 2015 at 10:09 PM, Han Sheng Chia <chiahansheng at gmail.com>
> wrote:
>
>> Hello!
>>
>> I'm new to this mailing list and so not quite sure who it goes to...but I
>> came to an open house a couple of weeks back and had some questions about
>> rounding the edges of a small (5x5") 22GA (0.028'') metal plate.I'm not
>> quite sure how to do it, but folks I met mentioned that I should email the
>> listserv and there could be people who would  be familiar with sawing and
>> working with metal. If you are able to help...I would love to chat with you!
>>
>> I'm also interested in coming to the open house tmr to print, but
>> remember that the 3D printer can be a little hard to work. Would someone
>> familiar with it be around who could possibly help with that?
>>
>> Thanks so much, and let me know :-)
>>
>> Hans
>>
>> _______________________________________________
>> Blabber mailing list Blabber at list.hackmanhattan.com
>> https://list.hackmanhattan.com/listinfo/blabber
>>
>
>
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> https://list.hackmanhattan.com/listinfo/blabber
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://list.hackmanhattan.com/pipermail/blabber/attachments/20151104/5171380b/attachment.html>


More information about the Blabber mailing list