[Blabber] AutoDesk/3D Printing PC Advice?
ben.sugimori at gmail.com
Fri May 31 20:24:06 UTC 2013
Now I've narrowed things to $543, for an HP Pavillion P7-1417, quad-core A10 (3.4GHz), DDR3 20GB SDRAM, AMD Radeon HD 7660D, 64-Bit, with a 2TB HDD.
I think I'd upgrade to a SDD eventually.
Monitor, keyboard, mouse, etc. aren't important.
Any warnings before I leap into a hasty purchase?
On May 31, 2013, at 15:31, Matt Lynch <njdevil at gmail.com> wrote:
> I only build my own computers, I havent had a pre-built one since 1995?
> This full rig cost $1000-1200, but its also for playing AAA games, like Borderlands 2, which you may not necessarily need to do.
> There are higher grade processors & motherboards than I listed below, but those are for generally meant for the fancy designers, and is definitely overkill to start with.
> Here's a brief total from Newegg:
> i7 Processor: ~$300
> 16GB RAM: ~$120 (around $60 per 8GB)
> LGA 1155 Mobo: $100-150
> Graphics card: $50-100 (depending on how fancy you want to get, these can quickly go over $200)
> So far, $570-670
> If you dont have an ATX case or a sufficient Power Supply, that will cost at least $100
> If you dont have a Hard Drive, that will cost another $50-100 (currently around $35/1TB)
> On Fri, May 31, 2013 at 3:20 PM, Ben S <ben.sugimori at gmail.com> wrote:
>> Yeah, I've been checking out quad-core i7 machines, including a Mac Mini w/Fusion Drive, but I think it's gonna have to be full-on PC.
>> I've used Autodesk CAD software before on a borrowed laptop, so I know it's DOable - just wondering what it's going to cost me.
>> I'm going to look through Factory Refurbished options...
>> On May 31, 2013, at 15:09, Matt Lynch <njdevil at gmail.com> wrote:
>>> Ive suffered through getting 3ds Max on my Win 7 gaming rig and I had to buy both a new processor and tons of RAM, 8GB wasnt enough, kept chunking during renders.
>>> Sandy or Ivy Bridge i7 (i5 might not be as good, need all that extra processing power)
>>> 20GB RAM
>>> ATI Radeon 6950HD 1GB? (it uses more system memory than vid memory)
>>> Now if I could only get it to export a proper manifold STL..... never could get it to create a manifold with the newest versions of Slicer (tried 30+ times), so I stopped using it and went to OpenSCAD.
>>> On Fri, May 31, 2013 at 2:44 PM, Ben S <ben.sugimori at gmail.com> wrote:
>>>> Hey folks,
>>>> I managed to get Autodesk Design Suite Ultimate 2013 at student pricing - a bargain! - and am looking to get a PC capable of running it, along with the Solidoodle 3D Printer I've ordered.
>>>> Can anybody recommend a machine (in the sub-$1k range) that would be a good fit?
>>>> I'm not married to any brand nor configuration; the only limitation is that it has to run Windows 7.
>>>> Any advice/recommendations would be appreciated.
>>>> Blabber mailing list Blabber at list.hackmanhattan.com
>>> Blabber mailing list Blabber at list.hackmanhattan.com
>> Blabber mailing list Blabber at list.hackmanhattan.com
> Blabber mailing list Blabber at list.hackmanhattan.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Blabber