[Blabber] Boosting the voltage from a lemon juice battery.

Matthew Duepner matthewduepner14 at gmail.com
Wed May 15 23:09:25 UTC 2013


Thanks for all the help


On Wed, May 15, 2013 at 5:44 PM, Guan Yang <guan at yang.dk> wrote:

> If you look in the big parts boxes on the eastern wall near the bathroom,
> there's a tray called through hole capacitors. Try to see if you can find
> anything in the nanofarad or picofarad range there.
>
> Otherwise you'll need to dig pretty deep in my box (box 13). Somewhere
> you'll find a small ziploc bag with a DIP tube, that contains in ATtiny2313
> and a crystal. There should be some 22pF and 27pF capacitors in there,
> Digi-Key part numbers 445-4763-ND and 445-4719-ND.
>
>
> On Wednesday, May 15, 2013 at 17:41 , Matthew Duepner wrote:
>
> > Any idea where they might be at Hack Manhattan
> > On May 15, 2013 5:35 PM, "Guan Yang" <guan at yang.dk (mailto:guan at yang.dk)>
> wrote:
> > > No, I'll be around tomorrow night.
> > >
> > >
> > >
> > > On Wednesday, May 15, 2013 at 17:16 , Matthew Duepner wrote:
> > >
> > > > Ok. Are you going to be at the space at all tonight since I wouldn't
> even know where to begin looking.
> > > > On May 15, 2013 5:07 PM, "Guan Yang" <guan at yang.dk (mailto:
> guan at yang.dk) (mailto:guan at yang.dk)> wrote:
> > > > > You want a high voltage rating and as small a capacitance as
> possible, because you need a lot of energy to charge a large cap up.
> Something in the picofarad range. We probably have some around that are
> meant for loading a crystal.
> > > > >
> > > > > On Wed, May 15, 2013 at 5:05 PM, Matthew Duepner <
> matthewduepner14 at gmail.com (mailto:matthewduepner14 at gmail.com) (mailto:
> matthewduepner14 at gmail.com)> wrote:
> > > > > > I think so. I will try to execute this when I get home. Is there
> any specific cap I should use? I
> > > > > > On May 15, 2013 4:59 PM, "Guan Yang" <guan at yang.dk (mailto:
> guan at yang.dk) (mailto:guan at yang.dk)> wrote:
> > > > > > > Yes, capacitors don't tend to self discharge very fast.
> > > > > > >
> > > > > > > Do you understand the circuit? You have two caps, C1 and C2,
> and an endless sequence of lemon batteries, B1, B2, B3, etc.
> > > > > > >
> > > > > > > Connect B1 to C1 to charge it up.
> > > > > > >
> > > > > > > Now connect B2 in series with C1. The two in series have a
> higher voltage. Connect to C2 to charge that.
> > > > > > >
> > > > > > > Now connect B3 in series with C2 to top up the charge of C1.
> Etc.
> > > > > > >
> > > > > > > The only thing I can think of is a diode to prevent any charge
> from going back. My favorite solution for this these days is a P-channel
> MOSFET. You want the current to go from drain to source. Short the gate to
> ground to open up the MOSFET.
> > > > > > >
> > > > > > > On Wed, May 15, 2013 at 4:55 PM, Matthew Duepner <
> matthewduepner14 at gmail.com (mailto:matthewduepner14 at gmail.com) (mailto:
> matthewduepner14 at gmail.com)> wrote:
> > > > > > > > Would I need only two caps or are more components needed.
> And would the cap discharge slowly enough to be measured with a multimeter?
> > > > > > > > On May 15, 2013 4:40 PM, "Guan Yang" <guan at yang.dk (mailto:
> guan at yang.dk) (mailto:guan at yang.dk)> wrote:
> > > > > > > > > You might actually need two caps to carry the charge
> "forward" in your scenario.
> > > > > > > > >
> > > > > > > > > On Wed, May 15, 2013 at 4:39 PM, Matthew Duepner <
> matthewduepner14 at gmail.com (mailto:matthewduepner14 at gmail.com) (mailto:
> matthewduepner14 at gmail.com)> wrote:
> > > > > > > > > > Could you use the lemons to charge a higher voltage cap,
> which when discharged would output a greater voltage?
> > > > > > > > > > On May 15, 2013 4:26 PM, "Guan Yang" <guan at yang.dk(mailto:
> guan at yang.dk) (mailto:guan at yang.dk)> wrote:
> > > > > > > > > > > Then I would just try tons of lemons in series. Maybe
> try different fruits to find the highest voltage per volume. Lime?
> > > > > > > > > > >
> > > > > > > > > > > On May 15, 2013, at 16:19, Matthew Duepner <
> matthewduepner14 at gmail.com (mailto:matthewduepner14 at gmail.com) (mailto:
> matthewduepner14 at gmail.com)> wrote:
> > > > > > > > > > >
> > > > > > > > > > > > awesome. I do want her daughter to understand and I
> also don't want it to look like I did the project for her. So nothing to
> complex. The fewer the components the better
> > > > > > > > > > > > On May 15, 2013 4:15 PM, "Guan Yang" <guan at yang.dk(mailto:
> guan at yang.dk) (mailto:guan at yang.dk)> wrote:
> > > > > > > > > > > > > Well if the goal is solely to generate a high
> voltage, there are tricks. Special flyback transformers, I have a few. You
> could potentially have hundreds of volts. (But again, very little current!)
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Wed, May 15, 2013 at 4:13 PM, Robert Diamond <
> rmd6502 at gmail.com (mailto:rmd6502 at gmail.com) (mailto:rmd6502 at gmail.com)>
> wrote:
> > > > > > > > > > > > > > Joule Thief - the more windings to the coil, the
> higher the voltage!
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Wed, May 15, 2013 at 1:10 PM, Matthew Duepner
> <matthewduepner14 at gmail.com (mailto:matthewduepner14 at gmail.com) (mailto:
> matthewduepner14 at gmail.com)> wrote:
> > > > > > > > > > > > > > > My chem teacher recently asked me if I would
> be able to help her make something that is like a battery but not a
> battery. I suggested super caps of course, but later found out that it
> needs to be something her daughter can make since it is part of one of her
> homework assignments. I suggested making a lemon juce battery. I also said
> I would look into ways of increasing the output voltage with electrical
> components since the goal of the exercise is to see who can construct a
> battery that generates the highest voltage. I have a few ideas but was
> wondering if anyone had any suggestions that would not be too complex.
> Sorry for the long email, but I thought the story was worth sharing.
> > > > > > > > > > > > > > > -Matthew
> > > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > > Blabber mailing list
> Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> (mailto:Blabber at list.hackmanhattan.com)
> > > > > > > > > > > > > > >
> http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > Blabber mailing list
> Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> (mailto:Blabber at list.hackmanhattan.com)
> > > > > > > > > > > > >
> http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > Blabber mailing list Blabber at list.hackmanhattan.com(mailto:
> Blabber at list.hackmanhattan.com) (mailto:Blabber at list.hackmanhattan.com)
> > > > > > > > > > > >
> http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > _______________________________________________
> > > > > > > > > > > Blabber mailing list Blabber at list.hackmanhattan.com(mailto:
> Blabber at list.hackmanhattan.com) (mailto:Blabber at list.hackmanhattan.com)
> > > > > > > > > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > _______________________________________________
> > > > > > > > > Blabber mailing list Blabber at list.hackmanhattan.com(mailto:
> Blabber at list.hackmanhattan.com) (mailto:Blabber at list.hackmanhattan.com)
> > > > > > > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:
> Blabber at list.hackmanhattan.com) (mailto:Blabber at list.hackmanhattan.com)
> > > > > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:
> Blabber at list.hackmanhattan.com) (mailto:Blabber at list.hackmanhattan.com)
> > > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > >
> > > >
> > > > _______________________________________________
> > > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:
> Blabber at list.hackmanhattan.com) (mailto:Blabber at list.hackmanhattan.com)
> > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:
> Blabber at list.hackmanhattan.com)
> > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> >
> > _______________________________________________
> > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:
> Blabber at list.hackmanhattan.com)
> > http://list.hackmanhattan.com/mailman/listinfo/blabber
>
>
>
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com
> http://list.hackmanhattan.com/mailman/listinfo/blabber
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.hackmanhattan.com/pipermail/blabber/attachments/20130515/7c217fff/attachment.html>


More information about the Blabber mailing list