[Blabber] Tweet by johngineer

Guan Yang guan at yang.dk
Sun May 12 19:42:41 UTC 2013


You'll have to, my hands aren't steady enough.

The equivalent in 0402s would be 32 square inches. Might be less if we can squeeze those in closer. 


On Sunday, May 12, 2013 at 15:41 , Robert Diamond wrote:

> I'm not doing that pick and place. Just saying.
> 
> On May 12, 2013, at 11:47 AM, Guan Yang <guan at yang.dk (mailto:guan at yang.dk)> wrote:
> 
> > Suppose you use 01005 resistors, and on the circuit board you need 4x as much space as the footprint of the resistors, then a 10k resistor can be made in just 2 square inches of board space.
> > 
> > 
> > 
> > On Sunday, May 12, 2013 at 14:44 , Robert Diamond wrote:
> > 
> > > But less than 10,000
> > > 
> > > On May 12, 2013, at 1:25 PM, Rendall Ren <rendall at gmail.com (mailto:rendall at gmail.com)> wrote:
> > > > That would mean you would need... at least... three!
> > > > 
> > > > 
> > > > On Sun, May 12, 2013 at 12:29 PM, Guan Yang <guan at yang.dk (mailto:guan at yang.dk)> wrote:
> > > > > Sage advice from an experienced electrical engineer.
> > > > > 
> > > > > John De Cristofaro (@johngineer (https://twitter.com/johngineer))
> > > > > 5/12/13, 11:44 (https://twitter.com/johngineer/status/333608713766203392)
> > > > > 
> > > > > Pro tip: if you need a 10k resistor, and you only have 1 ohm resistors, consider using them in series. 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> > > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > > 
> > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> > > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> > > http://list.hackmanhattan.com/mailman/listinfo/blabber
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Blabber mailing list Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> > http://list.hackmanhattan.com/mailman/listinfo/blabber
> 
> 
> 
> _______________________________________________
> Blabber mailing list Blabber at list.hackmanhattan.com (mailto:Blabber at list.hackmanhattan.com)
> http://list.hackmanhattan.com/mailman/listinfo/blabber





More information about the Blabber mailing list