[Blabber] Reprap rescue request

Joe Sadusk joe at sadusk.com
Sun Apr 8 20:33:38 EDT 2012


I went to the space and printed a replacement and now its working great.
Thanks!

On Sun, 2012-04-08 at 15:55 -0400, Guan Yang wrote:
> Yes, you can just do that. The dave_guan.INI slic3r settings should
> work with appropriate adjustments for detail. These days I usually
> print at 195 first layer, then 185.
> 
> 
> I think they are in the plastic box just labeled Guan, in plastic bags
> near the top. There should be both an MXL and an XL pulley.
> 
> On Sunday, April 8, 2012 at 15:45, Joe Sadusk wrote:
> 
> > Is that the same tooth profile?
> > 
> > 
> > Actually if you don't mind could I just print a pully on your mendel
> > in
> > the space?
> > 
> > 
> > Joe
> > 
> > 
> > On Sun, 2012-04-08 at 15:43 -0400, Guan Yang wrote:
> > > Alternatively there's a "real" XL pulley (molded plastic) in one
> > > of my
> > > boxes.
> > > 
> > > 
> > > On Sunday, April 8, 2012, Joe Sadusk wrote:
> > > I ruined one of my belt pulleys, and I don't have a spare
> > > printed. Does
> > > anyone have one or could print one up for me?
> > > Joe
> > > _______________________________________________
> > > Blabber mailing list
> > > Blabber at hackmanhattan.danielpacker.org
> > > http://hackmanhattan.danielpacker.org/listinfo/blabber
> > > _______________________________________________
> > > Blabber mailing list
> > > Blabber at hackmanhattan.danielpacker.org
> > > http://hackmanhattan.danielpacker.org/listinfo/blabber
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Blabber mailing list
> > Blabber at hackmanhattan.danielpacker.org
> > http://hackmanhattan.danielpacker.org/listinfo/blabber
> 
> 
> _______________________________________________
> Blabber mailing list
> Blabber at hackmanhattan.danielpacker.org
> http://hackmanhattan.danielpacker.org/listinfo/blabber




More information about the Blabber mailing list